03_Best practices for geotechnical planning & design in open pit mining operations

Public Power Cooperation of Greece

Chrys Steiakakis, MSc

Chrys SteiakakisMineral Resources Engineer, MSc

Civil Engineer, MSc, ASCEGeosysta Ltd

Best practices for geotechnical planning and design in open pit mining operations:

A sustainability approach

Zach Agioutantis, PhDProfessor of Rock Mechanics , TUCResearch Professor, Virginia Tech

Virginia TechTechnical University of Crete

Geosysta LtdScientific and consulting services

P. Schilizzi, PhD, E. Papakosta, A. Tsalidis, G. PagonisMining Engineers

Public Power Cooperation of Greece (∆ΕΗ)

SDIMI 2013 6th International Conference on Sustainable Development in the Minerals

Industry

30 June ‐

3 July 2013, Milos island, Greece

SDIMI 2013

Presentation outline:

Geotechnical Importance in Sustainable Mining

Geotechnical Best Practices in Open Pit Mining

Case Study of a lignite open pit mine in Greece

Conclusions

Chrys Steiakakis, MSc SDIMI 2013

Sustainable Mining:

Cost effective mining

Minimize Environmental Impact

Produce added social and economic value

How Geotechnical involvement affects sustainability?

Striping Ratio:

Too LOW

can produce slope failuresBingham Canyon Mine,

known as the Kennecott

Copper Mine

Kennecott slide moved more than 165M tons of dirt (by

Associated Press)

Striping Ratio:

Slope failures can result in loss of lifeTibet Gold Mine, 2013

Striping Ratio:

Slope failures can result in operation disruption

Yallourn

Coal mine, Victoria

Striping Ratio:

Slope failures can result in Company loss of Credibility

Round Mountain gold mine, Nevada

Striping Ratio:

Too HIGH

can produce uneconomical operation

Environmental and sociological impact

Mine tailings failures

Hungary Ajka alumina sludge spill 4

October 2010

Why do such events occur?

Due to poor initial design?

Due to poor design implementation?

Due to climatic (weather) conditions?

Due to other events (i.e. seismic, poor blasting)?

Due to combination of factors?

Can such occurrence be prevented?

Appropriate GEOTECHNICAL involvement in all mine stages

“Best practice”

approach:

Starting during Reserve Investigation

During Feasibility Study

During Mine Planning

During Mine Production

During Mine Closure

Reserve Investigation:

Involve as early as possible an Engineering Geologist

When drilling for reserves….

…use the opportunity for

geotechnical data collection,

and sampling

Feasibility Study:

Execute preliminary geotechnical testing of all materials

Feasibility Study:

Record geological ‐

geotechnical information in consistent way

Feasibility Study:

Install monitoring instruments in selected boreholes

Mine Planning:

Detail evaluation of geological –

geotechnical model

Mine Planning:

Detail slope stability analysis and slope design

Mine Planning:

Deterministic slope stability calculations (FS)

Probabilistic slope stability calculations (FS)

Limit equilibrium analysis Best estimate of parameters

Mine Planning:

Execute risk hazard analysisImplement risk management procedures

Mine Planning:

Design monitoring program

Evaluate and design contingency plans

Mine Operation:

Frequent re‐evaluation of geological –

geotechnical model

Routine monitoring of slopes

Store and analyze monitoring data (real time database?)

Implement warning and alarm limits

Implement contingency plan

Mavropigi Mine Ptolemaida PPC:Excavation depth ~150mMine operation from 2002328 bank Mm3

Mavropigi Mine Ptolemaida PPC:Slope monitoring locations

Mavropigi Mine Ptolemaida PPC:

Conclusions

Geotechnical best practices are tightly linked with the sustainability of mining operations (surface or

underground)

An example was presented for best practices with respect to geotechnical planning and design

Yes, there are success stories

Bingham Canyon Copper Mine

Thank you!

Visit www.geotechpedia.com

03_Best practices for geotechnical planning & design in open pit mining operations

Documents

Transcript of 03_Best practices for geotechnical planning & design in open pit mining operations

Open Pit Mining - University of Western Australia...Coffey Mining. Phil has extensive consulting experience on geotechnical aspects of the mining industry, and has worked on open pit

Chadwick2005c - Productive Open Pit Mining

A.04I Open Pit Geotechnical Design

Geotechnical considerations open pit audit – guide November 2015

9. Open Pit Mining

IMC Mining Integrated Pit Dump and Haulage

GRC SGP Open Pit Mining Procedures v1

Geotechnical considerations open pit audit guide · 2020-03-06 · Geotechnical considerations open pit audit – guide Page 2 of 28 Introduction This document was reformatted in

Geotechnical considerations for the stability of open pit ...

Independent Geotechnical Review of Preliminary Open Pit ...

ACG ONSITE GEOTECHNICAL TRAINING FOR OPEN PIT MINES

ACG ONSITE GEOTECHNICAL TRAINING FOR OPEN PIT MINES · 2016-08-12 · INSTRUCTOR Professor Phil Dight PhD, MSc Mining, BSc Mining Professor Geotechnical Engineering Australian Centre

Open Pit Mining, Mineral Processing, Materials … Business Unit Mining Business Unit Materials Handling Business Unit Processing Open pit mining systems Giant bucket wheel excavators

Open Pit Mining

Optimizing post-mining land use for pit area in open-pit ...

Economic significance of geotechnical uncertainties in open pit … · Economic significance of geotechnical uncertainties in open pit mines R Jele and MJ Dunn 112 Mining Geomechanical

blasting principlesin open pit mining

GEOTECHNICAL DESIGN FOR OPEN PITS AT … · The South African Institute of Mining and Metallurgy International Symposium on Stability of Rock Slopes in Open Pit Mining and Civil Engineering

Intelligent Ecosystem Open Pit Mining Gigamap

Mining Geotechnical Benchmarking