Post on 16-Mar-2020
Pöttinger HITTedder
97+021.02.0911
2
Quality requirements are growingSafe future, quality-oriented andproductive – the key essentials of modernagriculture.
It is not enough to just produce agriculturaltechnology, we have to meet the require-ments of today's farmers. That is a challenge demanding a will to experimentand the ability to think freely. Thinking thesame way as you.
Quality green forage is the basis for highmilk yield and meat production. The way inwhich technology is implemented is a deciding factor in bringing in a successfulharvest. While developing our latest generation of tedders we have been aimingfor high productivity and excellent working
quality. The objective is to harvest the highest quality forage in the shortest possible time at minimum cost.
To achieve this objective, we have kitted ourtedders out with new tine mountings, jock-ey wheels and shock absorber struts. Goahead and compare – the difference is clear.
That is why we invite you to join Pöttinger –and work together towards a successfulfuture!
3
Pages 4 – 5Technical details
Pages 6 – 7 Mountings – Transmission – Tines
Pages 8 – 9 Ground hugging – Fenceline tedding –
Transport
Pages 10 – 114-rotor tedder
Pages 12 – 13 6-rotor tedder
Pages 14 – 17 8-rotor tedder
Seite 18 – 19Technical Data
Tedders with 4 and 6 rotors
Seite 20 – 21Technical Data
Tedders with 8 rotors
Seite 22 – 23Options
Seite 24Imprint
4
High quality standards of manufacture guarantee a long
service life. The Pöttinger tedder range is packed with
modern precision engineering. Globular iron castings,
solid steel components, heavy duty rotary joints and top
quality paintwork speak for themselves. Distinctive
colours and modern design make our tedders look
good too.
You can be sure that Pöttinger implements command a
high resale value. Look for the details – we would like to
help you in reaching a decision.
Heavy duty tinesLosing tines during tedding is not just annoying, it also puts animals and following harvesting machinery at risk.The heavy duty tine with a long service life
The newly developed "Heavy Duty" tine � ensures reliability. The curved shapeof the mounting � supports the tine, making it more effective and harder wearing. Benefits: the tines are much more durable and need to be replacedless often. The tine security system � is integrated into the holder. The unequal lengths of the tines make a significant contribution to improvingthe spreading quality and extending the service life. In addition, this is veryimportant in ensuring clean forage.
�
�
�
5
Details with Smart Engineering
Rigid frame tube
Welds seams can beweak points. The frametubes (tube dimensions2.76 x 0.28’ / 70 x 7 mm)on HIT tedders are weld-free and pressed ontocastings for a permanent fit.
Tine arms made of
flat bar
Solid bars ensure thatfittings remain inplace more securely.
Large flotation tyres
6-PR flotation tyresensure smooth runningand protect the sward,even over bumpy ground. All wheels arefitted with anti-wrapguards as standard.
Support disc
Each rotor features anadditional support plateto increase the stabilityof the tine arm mount-ings. This ensures thearms cannot twist, evenin a really heavy crop.
High quality paintwork
Powder-coated paint-work has proven flexi -bility and durability inthe field. Surfaces canbe retouched withoutthe paint flaking away –true automotive quality.Pöttinger brings yousmart-looking designsand distinctive colours.
Heavy duty frame
hinges with replaceablebushes.
New safety guard
brackets
The robustness of themachines is furtherenhanced by new, clamped and reinforcedsafety guard brackets.Pöttinger’s high standard of workman -ship is also extremelyimportant in the tedders.
6
HIT – Tedder
4WD transmission Professionals look for positive power transmission and heavyduty design. This driveline features smart-engineered detailsthat put the Pöttinger range of tedders up front.
No power should be lost in the driveline. The heavy duty HIT-Tech double c.v. joints are similar to those on a tractor's fronthalf-shafts. Each rotor can move freely under full power inevery position. Ultimate ground hugging is guaranteed, evenon slopes and rough ground.
7
Stabilizing shock absorbers
Double-acting shock absorbing struts on both sidesensure the tedder remains centred, even on slopes.The struts stabilise the machine when it is lifted andduring transport on the road. Even at high travellingspeeds the machine is prevented from bouncing.Standard equipment on HIT 690 N/NZ, 800 NZ,810 N/NZ and 910 NZ. As an option for HIT 470 N,540 N and 610 N/NZ (varies from country to country).
Well thought out stabilization Pivoting headstock with heart-shaped pivot pin retainer
Perfect cornering with the tedder following in the tractor's tracks. The shockabsorbing struts provide additional stability with spring-loaded cylinders compensating for turning movement.When lifted the tedder swings into the central position. Even on slopes the ted-der cannot under-run, it follows the tractor faithfully.Pin interlock – to prevent freedom of movement for road transport – just relocatethe locking pin.
Tedders from Pöttinger are
well-known for their short
headstock. The centre of
gravity is located closer to
the tractor, reducing the
power requirement of the
tractor and increasing
driving safety.
Mountings – Transmission – Service life
Anbauvarianten
Pivoting headstock Rigid hitch mounting Trailed mounting
HIT 800 AZ, 900 A / AZ
HIT A (option:470, 540)
HIT HHIT N
8
Models up to and including HIT 540 N haverotors that rotate inwards to save spaceduring transport and parking.
From HIT 470 the „Hydrokomfort“ pivotingsystem raises the outer rotors. Also available for ALPINHIT 44 on option.
HIT 540 N – Transport
HIT 690 NZ – Hydrokomfort HIT 80 A– Transport
HIT – Tedder
HIT 810 NZ
� Adjust manually
ALPINHIT 44 N, 470 N,540 N, 610 N, 690 N,810 N and 910 N.
� Rigid rotor angle
adjustment
Fine tooth meshing allows the rotor angle tobe adjus ted in sevenstages of one degreeeach – adaptable to different forage types and quantities. (not available on 440 Hand 470 H).
Setting the wheels at an angle causes the tedder torun diagonally so the forage is not flung onto neighbouring fields or crops. This can also be usedto prevent the tedder drifting downhill when workingacross really steep slopes. The wheel can be adjusted to the left or right.
Clean forage is the number
one aim of the harvesting
process. Fewer germs and
lower ash content in the
silage means healthier
animals and higher meat
and milk yield. The optimum
rotor position must be easy
to adjust effectively.
Rotor trackingJockey wheel for
optimum ground tracking
and sward protection
The additional jockeywheel on the headstock isideal for guiding the tinesover the ground. A chain-type top link is used instead of a rigid top link. The jockey wheel ensures that theworking depth is always set correctly. Moreover, this top-of-the-range versionguarantees high-speed working, resulting in higher coverage. No tools are required to adjust the height of the jockey wheel. Wrapping is prevented reliably by an extra guard cover – even in high quantities of crop.
Fenceline tedding
Hydraulic fenceline
adjustment (standard onAZ models) – operatedby single-acting hydraulic cylinder withgas accumulator.
Mechanical fenceline
adjustment (HIT NZmodels) – operated fromthe tractor seat by lan-yard.
�
�
9
The right angle for a clean crop
HIT 540 N
10
4-rotor tedder
470 N – working width 14.44 ft / 4.40 m (DIN)This 4-rotor tedder features 6 tine arms per rotor and hydraulic action.
540 N – working width 17.06 ft / 5.20 m (DIN)The tedder for medium-sized farms. Can be operated comfortably from the driver's seat.
Tedding with smaller tractors: drawbar and single c.v. joint PTO shaft are available for HIT 470 and HIT 540.
The increased specifi -
cations required by small to
medium-sized businesses
are met by this 4-rotor
machine.
Designed to work on really
steep slopes in addition to
normal ground, these
tedders have a short
headstock and small
diameter rotors. Compact
engineering – working
widths from 13.12 to 17.06 ft
/ 4.0 to 5.20 m (DIN).
HIT 470 N
ALPINHIT 44 H/N special – Alpine tedder, working width 13.12ft / 4.0 m (DIN).The tedder is mounted on the tractor hitch with an adjustable headstock to optimise centre of gravity.Special lightweight construction for twin axlemowers, mountain tractors and light tractors. High tensile strength, aluminium-alloy transmissioncasing and arms of springsteel guarantee thismachine's toughness.Freewheel for PTOshaft also available.
Alpine tedding with adjustable headstock
ALPINHIT 44 N - special
11
for all locations ...
12
HIT 610 NZ
HIT 690 NZ
6-rotor tedder
13
The tedder range for
farmers who place value on
high performance, top-of-
the-range equipment and
comfortable operation.
The trailed version
HIT 800 AZ can achieve
really high coverage even
with smaller tractors.
610 N / NZ – working width 18.86 ft / 5.75 m (DIN)The special feature of the HIT 610 is its short headstock. The centre of gravityis located closer to the tractor hitch, reducing the power requirement of thetractor. The small diameter rotors (4.27 ft / 1.3 m) guarantee excellent ground hugging, best possible crop pickup and a uniform pattern of spread.690 N – working width 21.16 ft/ 6.45 m (DIN)The keenly-priced 6-rotor tedder with manual fenceline tedding system and 16 x 6.5–8 tyres.690 NZ – working width 21.16 ft/ 6.45 m (DIN)800 AZ / NZ – working width 24.44 ft / 7.45 m (DIN)The A models are equipped with an additional chassis which is also trailedduring operation.
HIT 610 NZ / 690 NZ and 800 NZ tedders come with a fenceline tedding systemas standard.
Hydrolift is standard equipment on HIT 800 AZ. The outer pair of rotors are raised to the limit stops during turning, and the transport chassis lifts thewhole tedder clear of the ground. A single-acting connection is all that is needed!
HIT 690 N Transport HIT 800 AZ Transport
best quality forage, stem for stem …
14
HIT 910 NZ
8-rotor tedder
HIT 910 NZ
15
810 N / NZ – working width 25.26 ft / 7.70 m910 N / NZ – working width 28.21 ft / 8.60 m
No power should be lost in the driveline. The heavy duty HIT-Tech double c.v.joints are similar to those on a tractor's front half-shafts. Each rotor can movefreely under full power in every position. Ultimate ground hugging is guaran-teed, even on slopes and rough ground.
The ultimate machine for
demanding applications.
You will look forward to
working with this level of
comfort.
Power clutch on the outer rotors can be hingedthrough 180°. Extra thick fingers withstand the highest stress.
where sheer performance is in demand ...
Details featuring Innovative Farming ...
HIT 810 N
No sinking in on damp ground
The two inner rotors are fitted with especially high load bearing flotation tyres:220/50-6 (HIT 810) or 18.5x8.5-8 (HIT 910).
HIT 910 AZ
8-rotor tedder
17
Wide during operation,
narrow and low during
transport.
910 A / AZ – working width 28.21 ft / 8.60 m
The HIT 910 AZ is equipped with a hydraulic pivoting transport chassis as standard. The chassis folds up hydraulically over the rotors during operation,improving the centre of gravity. The fenceline tedding system is also adjusted hydraulically.Lighting and warning signs are fitted as standard.
Wide during operation, nar-
row and low during trans-
port.
Parking height 10.7 ft / 3.26 mNZ or 11.02 ft / 3.36 m AZ.The transport interlocks engage automatically whenthe rotor units are raised.
HIT 910 A – with manuallyadjusted fenceline tedding system.
On HIT 910 AZ:
Comfortable operationSelect Control as an option.
where sheer performance is in demand ...
18
Farmers' needs are growing – and so is our product range. In addition to meeting the needs of small to medium sized farms
we also aim to satisfy the requirements of contractors and large farms.
Tedders with 4 and 6 rotors
Mower working width 5.41 ft / 1.65 m 6.07 ft / 1.85 m 7.22/7.38 ft / 2.20/2.25 m
ALPINHIT 44
HIT 470
HIT 540
HIT 610
HIT 690
HIT 800
HIT tedders to match any mower
H = hydraulic headstock rigidN = pivoting headstockA = trailed machineZ = central fenceline tedding systemspecial = adjustable headstock
PTO speed – 540 rpm
HIT Width Working width Rotors Arms/ Transport Parking height
DIN rotor width
44 H special 14.6 ft / 4.45 m 13.12 ft / 4.00 m 4 5 9.84 ft / 2.45 m 6.96 ft / 2.12 m
44 N special 14.6 ft / 4.45 m 13.12 ft / 4.00 m 4 5 9.84 ft / 2.45 m 6.96 ft / 2.12 m
470 N 15.42 ft / 4.70 m 14.44 ft / 4.40 m 4 6 8.20 ft / 2.50 m 7.38 ft / 2.25 m
540 N 17.72 ft / 5.40 m 17.06 ft / 5.20 m 4 7 9.35 ft / 2.85 m 8.53 ft / 2.60 m
610 N 19.68 ft / 6.00 m 18.86 ft / 5.75 m 6 5 9.35 ft / 2.85 m 9.74 ft / 2.97 m
610 NZ 19.68 ft / 6.00 m 18.86 ft / 5.75 m 6 5 9.35 ft / 2.85 m 9.74 ft / 2.97 m
690 N 22.47 ft / 6.85 m 21.16 ft / 6.45 m 6 6 9.84 ft / 3.00 m 10.99 ft / 3.35 m
690 NZ 22.47 ft / 6.85 m 21.16 ft / 6.45 m 6 6 9.84 ft / 3.00 m 10.99 ft / 3.35 m
800 AZ 25.75 ft / 7.85 m 24.44 ft / 7.45 m 6 6 9.84 ft / 3.00 m 12.24 ft / 3.73 m
800 NZ 25.75 ft / 7.85 m 24.44 ft / 7.45 m 6 6 9.84 ft / 3.00 m 12.24 ft / 3.73 m
All datas not binding
19
44 N special, 44 H special
470 N
540 N
610 N / NZ 690 N / NZ
8.5/8.6 ft / 2.60/2.62 m 8.86 ft / 2.70 m 9.97/10 ft / 3.04/3.05 m 11.35/11.48 ft / 3.46/3.50 m
min. kW/hp Weight
11/15 540 lbs / 245 kg
11/15 595 lbs / 270 kg
15/20 846 lbs / 384 kg
26/35 926 lbs / 420 kg
30/40 1477 lbs / 670 kg
30/40 1532 lbs / 695 kg
33/45 1543 lbs / 700 kg
33/45 1599 lbs / 725 kg
30/40 1819 lbs / 825 kg
37/50 1719 lbs / 780 kg
Expectations regarding sheer processing capacity continue to
increase. One of our aims is to meet the new requirements of
contractors and large farms.
Tedders with 8 rotors
N = pivoting headstockA = trailed machineZ = central fenceline tedding system
PTO speed – 540 rpm
HIT Width Working width Rotors Arms/rotor Transport Parking height
DIN width
810 N 25.62 ft / 7.81 m 25.26 ft / 7.70 m 8 5 9.84 ft / 3.00 m 12.14 ft / 3.70 m
810 NZ 25.62 ft / 7.81 m 25.26 ft / 7.70 m 8 5 9.84 ft / 3.00 m 12.14 ft / 3.70 m
910 A 29.07 ft / 8.86 m 28.21 ft / 8.60 m 8 6 9.84 ft / 3.00 m 10.07 ft / 3.26 m
910 AZ 29.07 ft / 8.86 m 28.21 ft / 8.60 m 8 6 9.84 ft / 3.00 m 10.07 ft / 3.26 m
910 N 29.07 ft / 8.86 m 28.21 ft / 8.60 m 8 6 9.84 ft / 3.00 m 10.07 ft / 3.26 m
910 NZ 29.07 ft / 8.86 m 28.21 ft / 8.60 m 8 6 9.84 ft / 3.00 m 10.07 ft / 3.26 m
All datas not binding
20
Mower working width 5.41 ft / 1.65 m 6.07 ft / 1.85 m 7.22/7.38 ft / 2.20/2.25 m
HIT 810
HIT 910
Mower combinations 17.39 ft / 5.30 m 18.70 ft / 5.70 m 20.34 ft / 6.20 m
HIT 810
HIT 910
HIT tedders to match any mower
Front mower 9.84 ft / 3 mRear mower 8.60 ft / 2.60 m
Front mower 9.84 ft / 3 mRear mower 9.84 ft / 3 m
Front mower 9.84 ft / 3 mRear mower 11.48 ft / 3.50 m
min. kW/hp Weight Hydraulic connections on tractor
40/55 22073 lbs / 940 kg 1 single-acting
40/55 2117 lbs / 960 kg 1 single-acting
33/45 3076 lbs / 1395 kg 1 double-acting / 1 single-acting
33/45 3120 lbs / 1415 kg 1 double-acting
45/60 2491 lbs / 1130 kg 1 double-acting
45/60 2536 lbs / 1150 kg 1 double-acting
21
HIT 910 A / NZ / AZ
8.5/8.6 ft / 2.60/2.62 m 8.86 ft / 2.70 m 9.97/10 ft / 3.04/3.05 m 11.35/11.48 ft / 3.46/3.50 m
24.41 ft / 7.44 m 27.23 ft / 8.30 m
Front mower 9.84 ft / 3 m2 x rear mower 8.60 ft / 2.60 m
Front mower 9.84 ft / 3 m2 x rear mower 9.84 ft / 3 m
22
OptionsHIT Tyres Tyres Additional Fenceline tedding system
Chassis Jockey wheel
44 H special 13 x 5.0-6
44 N special 13 x 5.0-6 Optional Manual
470 N 15 x 6.00-6 Optional Manual
540 N 16 x 6.5-8 Optional Manual
610 N 15 x 6.00-6 Optional Manual
610 NZ 15 x 6.00-6 Optional Remote
690 N 16 x 6.5-8 Optional Manual
690 NZ 16 x 6.5-8 Optional Remote
800 AZ 16 x 6.5-8 18.5 x 8.5-8 Remote
800 NZ 16 x 6.5-8 Optional Remote
810 N 15 x 6.00-6* Optional Manual
810 NZ 15 x 6.00-6* Optional Remote
910 A 16 x 6.5-8 260/70-15,3 Optional Manual
910 AZ 16 x 6.5-8 260/70-15,3 Optional Remote
910 N 16 x 6.5-8** Optional Manual
910 NZ 16 x 6.5-8** Optional Remote
* Middle rotors 220/50-6
**Middle rotors 18.5 x 8.5-8
260/70-15,3
16 x 6,5-8
18,5 x 8,5-8
18,5 x 8,5-8
15 x 6,00-6
15 x 6,00-6, 16 x 6,5-8
Manual wheel adjustment
Central fenceline adjustment
13 x 5,0-6
23
Hydraulic Hydrokomfort Shock absorber Swath Lighting
fenceline system struts transmission
Optional
Optional Optional
Standard Optional Optional Optional / Optional
Standard Optional Optional Optional / Optional
Standard Optional* Optional Standard / Optional
Optional Standard Optional* Optional Standard / Optional
Standard Standard Optional Standard / Optional
Optional Standard Standard Optional Standard / Optional
Standard Standard – Optional Standard
Optional Standard Standard Optional Standard / Optional
Standard Standard Optional Standard / Optional
Optional Standard Standard Optional Standard / Optional
Standard – Optional Standard
Standard Standard – Optional Standard
Standard Standard Optional Standard / Optional
Optional Standard Standard Optional Standard / Optional
* Shock absorber bar standard
All data for information only, features may vary from country to country.
Single-acting hydraulicconnection (610, 690, 800,910 NZ)
Hydrokomfort 44, 470,540 single-acting
Shock absorber Swath gear unit Warning signs to nationalroad safety requirements.
LightingAbsorber bar standard on 610 N
Double-acting hydraulicconnection 910 AZ
Hydrolift 610, 690, 800single-acting
Hydrolift 910 double-acting
Alois Pöttinger
Maschinenfabrik GmbH
Industriegelände 1A-4710 Grieskirchen Phone: +43 (0) 7248/600-0Fax: +43 (0) 7248/600-2445
Pottinger UK
Redlake Trading EstateIvybridgeDevon PL21 0EZ – EnglandPhone: 01752 891375Fax: 01752 891379www.pottingeruk.co.uk
Poettinger Canada Inc.
650, Route 112St-Cesaire, J0L 1 T0, PQPhone: (450) 469-5594Fax: (450) 469-4466E-Mail:sales.canada@poettinger.caWeb: www.poettinger.ca
Poettinger US Inc.
107 Eastwood RoadMichigan City, IN 46360Toll-free: 1-855-879-8597Tel: (219) 879-8597Fax: (219) 879-5102E-mail: sales.us@poettinger.us
Poettinger Australia P/L
15 Fordson RoadCampbellfield, VIC 3061Phone: +61 3 9359 2969Fax: +61 3 9359 6962e-mail: sales.au@poettinger.com.auwww.poettinger.com.au
Quality for the futureMachines with the cloverleaf mark are internationally successful with reliable qualityand service.
Cathodic electrodip priming and powder coating – automobile paint quality
Laser cutting machines for high-precision panel forming
New durability centre for expendable parts
The latest 3D construction
Future-safe component part testing – at the new Grieskirchen Technology and Innovation Centre, the most demanding working conditions are simulated and maximum limits are determined
Pöttinger original expendable parts offer added value at a glance: High durability, precise fitting accuracy and constant availability.
Product delivery – Every Pöttinger customer has a right to the orderly delivery of the product bytheir Pöttinger sales agent, in order to ensure the guarantee.
Hit
/en
091
1
www.poettinger.at – e-mail: landtechnik@poettinger.at
Be more successful with
Importer for Ireland:T. Traynor & Sons Ltd.
Cashel Road, Clonmel Co. TipperaryIrelandPhone: 052/25 766Fax: 052/25 802e-mail: info@traynor.iewww.traynor.ie
Importer for New Zealand:Origin Agroup
PO Box 673, 57 Hautapu RoadCambridgePhone: 064 7 823 7582 Fax: 064 7 823 7583 e-mail: info@originagroup.co.nz www.originagroup.co.nz