Post on 05-Jun-2019
CURRICULAM VITAE
Dr.TTM.Kannan
Contact Number9865486220
8610650346
Whatsapp Number
8610650346
Email ID
ttmkresearch@gmail.com
ttmk_8@rediffmail.com
Address for Communication Dr,TTM.Kannan, S/o TT.Mahadevan, M-82,Phase-I, Housing Unit, Annanagar, Trichy-620 026 Tamilnadu, India
Personal ProfileDate of Birth : 11.02.1973Gender : Male
Religion : Hindu
Nationality : Indian
Marital Status : Married
Children : 1
Spouse name : K.TamilSelvi
Languages known : Tamil, English
Blood Group : B +
Aadhar Number :5762 0027 03273
PAN Number : BBBPK1143D
Voter Id : KFS5556253
Objectives To work as an enthusiastic hardworking professional in a
competent environment that enables me to widen my research knowledge
with emerging trends in technology.
Academic Chronicle
Course Institution/University Year of passing
Marks obtained
Ph.DMechanical Engineering
PRIST UNIVERSITY
Thanjavur2017 Commended
M.TechManufacturing
Technology
PRIST UNIVERSITY
Thanjavur 2012
9.13First class
with distinction
AMIEMechanical Engineering
The Institution of Engineers
(India)Kolkata
20097.13
First class
DiplomaMechanical Engineering
Srinivasa PolytechnicKeeranur
199264.16
First class
HSCGeneral
Machinist
B.H.H.S.SchoolTrichy
199076.5
First class
SSLCB.H.H.S.SchoolTrichy
198867.4
First class
High lights1. 6 Patents filed and Published in IPR-Chennai2. 2 Research Fund received and completed3. 53 Research articles are published4. 19 Conference papers are published5. Research Supervisor in PRIST UNIVERSITY6. Board of Study member in PRIST UNIVERSITY7. 7 Professional memberships in professional body8. Project Guide in AMIE Examinations9. 1 Technical book (ISBN) is published10. 2 Book chapter (ISBN) is published11. 2 Keynote address in Seminar /lecture program/ Workshop
CURRICULAM VITAE
Professional Experience
Associate Professor - Mechanical Engineering in M.A.M. School of Engineering, Trichy, From 28.06.2017 to Till Date
Associate Professor - Mechanical Engineering in Indra Ganesan College of Engineering, Trichy, From 02.05.2016 to 27.06.2017
Assistant Professor - Mechanical Engineering in PRIST UNIVERSITY, Thanjavur, From 01.07.2014 to 13.04.2016
Assistant Professor - Mechanical Engineering in Pavender Bharathidasan Institute of Information Technology, Trichy, From 06.05.2013 to 17.04.2014
Assistant Professor - Mechanical Engineering in JJ college of Engineering and Technology, Trichy, From 02.01.2012 to 30.04.2013
Lecturer –Mechanical Engineering in Musiri Institute of Technology, Musiri, From 12, 11.2008 to 12.08.2010
Research Fund received from Funding agencies
Name of the Funding Agency
Amount Received
Title of the Project Status of Project
The Institution of
Engineers(India)
Kolkata.
Rs 50,000 Implementation of Micro
factories in Mechanical
Industries.
Project Completed
On March 2014.
The Institution of
Engineers(India)
Kolkata.
Rs 50,000 Development of MEMS
based Pocket Factory for
Sustainable
Manufacturing System.
Project Completed
on April 2017
Google Scholar Citation index
Citation Index H index I 10 index
41 4 -
Title of PhD Thesis: Development of portable tabletop micro factory for
sustainable manufacturing system
Research Fund applied
CURRICULAM VITAE
1. Proposal submitted to Tamilnadu State Council for Science and Technology
(TNSCST) to Student project fund scheme (Rs 20,000), Development of
Mems based Micro machinetools. August 2017.
2. Proposal submitted to Tamilnadu State Council for Science and Technology
(TNSCST) to student project fund scheme (Rs 20,000). Development of
Plastic lathe for Micro components. August 2017.
3. Proposal submitted to The Institution of Engineers - Kolkatta (Rs 30,000) to
organize second International conference on “Recent advances in Engineering
and Technology (ICRAET-2018), November 2017.
4. Proposal submitted to AICTE-Short term training program on Advances in
manufacturing processes,(Rs 4,50,000),November 2017
5. Proposal submitted to The Institution of Engineers (India) Kolkatta (Rs
50,000) to Student Project fund scheme. Development of Nano Factory for
Sustainable Manufacturing system, December 2017.
Awards and Recognition
4. Received “Best paper Award and Cash award” from International Journal
of Trendy research in Engineering and Technology, March 2018.
3 Received “Certificate of Excellence Award” for outstanding contribution to
journal publications form International journal of innovative research in
Science and Technology in Nov-2017. (Certificate serial no 15).
2. Received “IG RESEARCH AWARD” for published research article in peer
reviewed journal during the academic year 201-2017 in Indra Ganesan collge
of Engineering, Trichy.April 2017.
1. Received participation certificate in Assist world record in Pavendar
Bharathidasan Institutions in the awareness program on “Save nature to
combat global warming” in Human Banyan Tree program on 05.10.2013.
PATENT
CURRICULAM VITAE
Inventors Name Title of
Invention
Application
Number
Date of
Filing
Status of Patent
TTM.Kannan
&
Dr.P.Marimuthu
Non Automatic
table top portable
lathe
5040/CHE/2013
&
IPR office
Chennai
08.11.2013
Journal Published
&
Waiting for
Examination.
Dr.P.Marimuthu
&
TTM.Kannan
Tabletop Portable
Mini friction
welding for
miniature of
welded joints
371/CHE/2015
&
IPR office
Chennai
27.01.2015 Journal Published
&
Waiting for
Examination.
Dr.S.Bharathi
Raja
&
TTM,Kannan
Development of
Micro leaf jig for
Micro
Components
201641043779
&
IPR office
Chennai
22.12.2016 Journal Published
&
Waiting for
Examination.
Dr.P.Marimuthu
&
TTM.Kannan
Development of
Mini surface
grinder
201741006964
&
IPR office
Chennai
28.02.2017 Journal Published
&
Waiting for
Examination.
Dr.P.Ranjith
Kumar
Dr.TTM.Kannan
Dr.K.Chandra
Sekaran &
R.Ramanathan
Acrylic open type
micro drill jig
201741027566
&
IRP office
Chennai
03.08.2017 Journal Published
&
Waiting for
Examination
Dr.P.Ranjith
Kumar
Dr.TTM.Kannan
Dr.K.Chandra
Sekaran
Automation in
Micro turning
process using
sensitive
controlled motor
201741046967
&
IRP office
Chennai
28.12.2017 Journal Published
&
Waiting for
Examination
Professional Memberships
CURRICULAM VITAE
Professional society Membership grade Membership Number
Indian Society for Technical Education, (ISTE) -New Delhi.
Life member LM 28606
The Institution of Engineers-India
(IEI)-Kolkata
Associate member AM 138262-7
International Society for Research and Development (ISRD)- UK
Fellow Member F 3140900961
International Association of Engineers (IAENG)-
HONG KONG
Associate member AM164877
Institute of Research Engineers & Doctors (IRED)-USA
Associate member AM 10100058512
Institute for Engineering Research and Publication (IFERP)-India
Member M-17319485
International Academy for Science and technology education and
research (IASTER)-India
Member M-16060150
BOOK Publication
3. Title of Book: Introduction to Mechanical Engineering (ISBN -978 -93-
84443-49-8 ) Chapter 12 – Experimental investigation and design optimization of
roundness error of micro drilling process on AISI 316 sheets.
Authors: Dr.TTM.Kannan, Dr.P.Ranjith Kumar, Dr.K.Chandrasekaran,
R.Ramanathan and PM.Ramulingam, Publishers: Research India Publications,
Publication date : 30.03.2018
2. Title of Book: Development of MEMS based Pocket factory for Sustainable
Manufacturing (ISBN -978 620 2 01535-6),
Authors: Dr.TTM.Kannan, Dr.P.Ranjith Kumar and Dr.K.Chandrasekaran
Publishers: Lambert Academic Publishing-West Germany.Publication date :
28.08.2017
1. Title of Book: Emerging Trends in Science, Engineering and Technology
(ISBN-978 81 322 1007 8)
CURRICULAM VITAE
Book Chapter: Design and Development of Non Automatic Tabletop Mini Lathe
(PP- 157-164),
Authors: TTM.Kannan, Dr.P.Marimuthu
Publishers: Springer – India, Publication date : December 2012
Key note address /Conference / Lecture /Presentation in National
seminar and Symposium
1. Lecture on “Mems based Pocket factory for Sustainable manufacturing
system” in Institution of Engineers-Trichy Local chapter - BHEL on
21.02.2017.
2. Lecture on “Micro factory for Sustainable Manufacturing system” in
Institution of Engineers –Trichy local Chapter –BHEL on 24.05.2016.
Organizer in Conference / FDP/Seminar /Symposium
6. Program coordinator in One day workshop on Modern NDT Techniques on
19.01.2018 at M.A.M. School of Engineering, Tiruchirapplalli.
5 .National Advisory Committee member in IFERP organized International
conference on Recent advancements in information, Technology, Science and
Engineering, Conduted by Sengundhur Engineering college,Erode on 16.03.2018
4 .National Advisory Committee member in IFERP organized International
conference on Recent advancements in information, Technology, Science and
Engineering, Conduted by APC Engineering College, Thothugudi on
14,15.12.2017.
3.Session Coordinator in Bio energy and Bio fuel in International conference on
Power, control, Signals and instrumentation Technology (ICPCSI
2017),Conducted by Saveetha Engineering college, Chennai on 21,22-09.2017.
2. Organizing Secretary in Second International conference in Recent advances
in Engineering and Technology (ICRAET-2018) conducted by M.A.M.School of
Engineering,Trichy on 29,30.01.2018
CURRICULAM VITAE
1.Organizing Secretary in Faculty Development Programme on ‘A Guide to
beginners in research” conducted by Indra Ganesan college of Engineering,
Trichy on 07.01.2017
Reviewer and Editorial Board Member1. Editorial Board in Journal of Mechanical and Production
Engineering (JMPE) –Scopus Indexed
2. Reviewer in Journal of the Serbian Tribology society – Scopus
Indexed
3. Reviewer in International journal Engineering research and technology
(IJERT),Register Number : IJERTREW1313.
4. Reviewer in International journal of Engineering Trends and
Technology (IJETT), Id: SSRGY-IJETT-1299.
5. Reviewer in Advances in Engineering Research (IJAER), Id:
IRA/ENGG/9979.
6. Reviewer in International journal of research in science and
Technology (IJRST),Id : IRA/ENGG/9979.
Publications in National / International Journals
53. TTM.Kannan, P.Ranjith kumar, R.Ramanathan. K.Chandra sekaran Alignment
test on Portable Tabletop Mini lathe. Journal of manufacturing Engineering,13,
2018,pp 59-62
52. P.Ranjith kumar,K.Chandra sekaran,TTM.Kannan and R.Ramanathan
Automation in micro turning process using sensitive controlled motor, The patent
office journal ,Issue 01/2018,(2018), pp 78.
51.TTM.Kannan,K.Chandra sekaran,R.Ramanathan and S.Suriya Fabrication of
optimization of Mems based micro grinder, International journal of Engineering
research in Mechanical and Civil Engineering,2,12,(2017),pp 97-100.
50.K.Chandra sekaran, TTM.Kannan, R.Ramanathan and P.Ranjithkumar Taguchi
and response surface methodologies engaged for surface roughness in CNC turning
AISI 316 by multi layered coated tool, Journal of Manufacturing
Engineering,12,2017,pp235-240
CURRICULAM VITAE
49. Muhammed shihan,J.Chandra dass, M.Senthil kumar and TTM.Kannan,
Experimental Investigation and design optimization of Face milling parameters on
Monel K -500 Using DOE concept, International journal of Mechanical and
production Engineering Research and Development,7,2017, pp 403-410.
48. P.Ranjith kumar, TTM.Kannan,. K.Chandrasekaran, and R.Ramanathan, Acrylic
open type micro drill jig, The patent office journal, issue 33/2017,18.08.2017,pp
26886.
47. Dr.P.Marimuthu and TTM.Kannan Development of Mini Surface grinder, The
patent office journal,07.04.2017,pp 9128.
46. TTM.Kannan, P.Vijaya Kumar,M.Ganesan and A.Pulidevan Evaluation of axial
shortening of friction welded joints of EN-24 and ETP copper cylindrical rounds
using DOE concepts. Journal of Manufacturing ,12, 2017,pp 33-36.
45. TTM.Kannan,R.pavendhan,R.Ajith and S.Yuvasri Design Optimization of
drilling process parameters of EN-24 steel plates using DOE. Transactions on
Innovations in Science and Technology,1.2016,pp 60-64.
44. Dr.S.Bharathi Raja and TTM.Kannan Development of Micro leaf Jig for Micro
Components,The patent office Journal,30.12.2016,pp -76945
43. TTM.Kannan, M.Samuel, P.GuruPranesh Design and Optimization of portable
Tabletop moulding machine process parameters using DOE concepts, International
right path journal of Science,Engineering and Technology, 1.(2016),pp 8-12.
42. J.Ganesh,P.Renuga devi, P.Vijayakumar and TTM.Kannan Optimzation of
drilling process parameters on Die steel (H-13) using carbide coated drill by Design
of Experiment concept, International Journal of Advanced Engineering research and
science,3,(2016),pp 71-76.
41. S.Giridharan,TTM.Kannan and K.Balamurugan Experimental Investigation and
Analysis of dissimilar welding of AISI316L and IS2026 using GTAW, International
Journal of Advanced Engineering research and science,5,(2016),pp 11051-11058.
40. TTM.kannan, P.Vijaya kumar, Mohamed Fayiz and Prasanna.E Experimental
Investigation of Micro spot welding process parameters on different materials by
DOE concept,3, (2016),pp 565-570.
CURRICULAM VITAE
39. S.Desigan, V.Kalaiyarasan,TTM.kannan and P.Vijaya Kumar Heat Analysis of
PTFE plates on drilling process by ANOVA methodology, International journal of
Engineering trends and technology,3,(2016),pp 271-274.
38. S.Desigan,V.Kalaiyarasan,TTM.Kannan and P.Vijaya kumar Analysis of
Surface roughness of PTFE plates on drilling process by ANOVA methodology,
International Journal of Innovative Research in Science and Technology,5,2016,pp
48-54.
37. TTM.Kannan.Giridharan and V.Surendiran,S Study and overview about Walking
robot for complex environment, International Journal of Applied Engineering
Research,11.(2016),pp 393-396.
36. S.Jagadeesh Sridhar,TTM.Kannan,R.Baskaran and S,Giridharan Experimental
Investigation on machining time of Cylindrical grinding process on OHNS (AISI-
O1)steel round rounds using ANOVA, Journal of Manufacturing Engineering, 11,
(2016),pp 35-40.
35. TTM.Kannan, I. Justin Anthony and P.Vijaya kumar Design Optimization of
turning parameters of PTFE (Teflon) cylindrical rods using ANOVA methodology,
International journal of Applied Engineering research, 11.2016,pp 518-525.
34. P.Marimuthu, TTM.Kannan and S.Saravanan Experimental Investigation and
Design optimization of Micro drilling process parameters of Austenitic Stainless steel
(Aisi 316) sheets by Doe concept, Journal of Mechanical and Civil Engineering ,12,5
(2015), PP 24-28.
33. R.Hari Krishnan,TTM.kannan,P.Vijayakumar and S.Giridharan Evaluation of
Mechanical Properties of Aluminium metal matrix composites,International journal of
research in mechanical Engineering,3,(2015),pp14-18.
32. C.Sundar,P.S,Manian, S.Saravanan and TTM.Kannan Experimental
Investigation and Process parameter study of Friction Stir welding of AA 8011,
International Journal of Mechanical Engineering research and Technology,1,
(2015),pp
31. Viswanathan.G, TTM.Kannan, M.Abdul Ghani Khan and J.Chandra dass
Optimization of Mechanical properties of Friction welding parameters of Austenitic
CURRICULAM VITAE
Stainless steel(AISI-316)rods using Design of experiments concept, Journal of
Manufacturing Engineering,2015 , 2,PP 91-96.
30. TTM.Kannan,K.Bhuvanesh.S.Giridharan and P.Vijayakumar Optimization of
Boring parameters of AISI410 by Design of Experiment concept” International
journal of Applied Engineering Research, 10,(2015), pp523-527.
29. P.Marimuthu,TTM.Kannan,K.Sabariesan and P.Vijayakumar Experimental
Investigation of Uncoated cemented carbide tool Insert during turning process of EN-
19 steel by regression Analysis, International journal of Applied Engineering
research, 10, 3(2015),pp 2442-2445.
28. M.Melwin jagadeesh Sridhar,TTM.Kannan,V.kalaiyarasan and R,Baskaran Heat
generation Analysis and process parameters optimization of Cylindrical grinding on
OHNS (AISI 0-1) steel rounds, International journal of Applied Engineering research,
10,3(2015),pp 2442-2445.
27. P.Marimuthu and TTM.Kannan, Development of Tabletop micro factory for
Sustainable manufacturing system, International journal of Applied Engineering
research, 10,3(2015),pp 2446-2449.
26. P.Marimuthu and TTM.Kannan, Optimization of Friction welding parameters of
AA6082 miniature of Welded joints, International journal of Applied Engineering
research,10,15 (2015),pp 12174-12181.
25. P.Marimuthu,TTM.Kannan and G.Balaji Evaluation of Hardness and Tensile
strength of Micro spot welded joints on different materials” International journal of
Applied Engineering research, Volume 10, 3, (2015),pp12174-12181.
24. Reegan C, R Tamizh Selvan, T T M Kannan, R Baskaran, P Vijaya kumar,
Product Analysis and Stress Analysis of Process Piping Routing by Using CEESAR-
II, International Journal of Mechanical Engineering and Robotics Research,
4,2015,154-161.
23. Hussain lal.A., TTM.Kannan.,S.Giridharan., M.Suresh Kumar, Experimental
analysis on Deformation of 6061-T6 Aluminium bracket using Finite Element
Analysis, Journal of Manufacturing Engineering, 10,1,2015, pp
CURRICULAM VITAE
22. Nedumaran.K., Baskaran.R., Kannan, TTM. and Vijaya Kumar, P, Optimization
of Ball end milling parameters of AISI316 steel using ANOVA
Methodology,International journal of Information Research and review, 2,3, 2015,pp
21. A.Muhammed shihan,J.Chandra dass,TTM.Kannan, Experimental Investigation
of heat exchanger performance with Aluminium and copper micro parts, International
journal of research in mechanical Engineering,3,1, 2015.pp
20. P.Marimuthu and TTM.Kannan , Table top Portable Mini friction Welding
machine for Miniature of welded joints, The Patent Office Journal 30.01.2015.,(Issue
No 05/2015),Page no:22220.
19. M.Melwin Jagadeesh Sridhar,M.Manickam,TTM.Kannan,M.Abdul Ghani Khan
Optimization of cylindrical grinding process parameters of OHNS(AISI-01)rounds
using design of Experiments concept, International Journal of Engineering Trends and
Technology,3,2014, pp109-114.
18. S.Prathiban,M.Manickam,TTM.Kannan,P.Renukadevi “Effect of Aerofoil
thickness over pressure distribution in Wind turbine blades” International Journal of
Mechanical Engineering and Robotics Research. Volume 3, October 2014,Pages 564-
572.
17. G.Samuthiram,TTM.Kannan,M.Sureshkumar,V.Ananda Natarajan Evaluation of
Mechanical Properties of Friction welded joints of EN-24 Steel cylindrical rods,
International Journal of Mechanical Engineering and Robotics Research, 3, 2014,pp
417-421.
16. M.Saravana Kumar, TTM.Kannan, S.Giridharan and P.Vijayakumar
Optimization Micro milling parameters of AL-6082 by ANOVA
methodology,International Journal of Mechanical Engineering and Robotics
Research, 3,2014,pp 378-382.
15. M.Sundeep,M.Sudhahar,TTM.kannan,S.Gridharan Optimization of Drilling
parameters on Austenitic stainless steel(AISI 316) using Taguchi methodology,
International Journal of Mechanical Engineering and Robotics Research, 3,
2014,pp388-394.
CURRICULAM VITAE
14. R.Ramya,TTM.Kannan,S.Giridharn and R.Baskaran Optimization of Turning
parameters of EN-8 steel cylindrical rods using Taguchi methodology, International
Journal of Mechanical Engineering and Robotics Research,3,2014,pp 360-366.
13. N.Muthukrishnan,TTM.Kannan,J.Madhan,P.Vijayakumar Optimization of
Turning parameters of OHNS(AISI-01) steel rods using Taguchi methodology,
International Journal of Mechanical Engineering and Robotics Research,
3,2014,pp346-352.
12. S.Giridharan,TTM.Kannan,P.vijayakumar and S.Sunil kumar, Study and
overview about process Failure mode and effect Analysis on Automotive Timing
Chain” International Journal of research in Mechanical Engineering, 2,2014,pp 11-18.
11. K.Bhuvanesh,S.Giridharan,TTM,Kannan,P.vijayakumar Optimization of drilling
parameters of EN-8 steel plates using Taguchi Methodology International Journal of
research in Mechanical Engineering,2,2014,pp11-18.
10. P.Marimuthu and TTM.Kannan, Non Automatic Tabletop Portable Minilathe,
The Patent Office Journal 30.05.2014.,(Issue No 22/2014),pp14589.
9. TTM.Kannan,K.Mekala.J,Chandra das, K.Chandrasekaran, E.Ramesh and
R.Narasing babu, Optimization of Cylindrical grinding Parameters of Austenitic
stainless steel rods (AISI 316) by Taguchi Method, International Journal of
Mechanical Engineering and Robotics Research,3,2014,Pages 1-8.
8. TTM.Kannan,R.Rajasekaran,M.Ganapathy,B.Ashok and B.Shiva Pragash.,
Experimental Investigation of Heat partition, Tool wear in Hard turning of AISI 316
steel using cBN cutting tool insert, International Journal of Mechanical Engineering
and Robotics Research,3, 2014,pp34-41.
7. S.Nizam sadiq, T.R.Raguraman,D.Thresh Kumar and TTM.Kannan, Optimization
of Milling parameters of OHNS steel using TiAlN coated cutter by Design of
Experiment Technique, International Journal of Mechanical Engineering and Robotics
Research, 3,2014, pp285-291.
6. S.Pungaiya, R.Ashok raj, and T.T.M.Kannan. Study and development of new
portable Refrigerator Kit for Medical Application, International Journal of
Mechanical Engineering and Robotics Research,2,2013,pp 315-319.
CURRICULAM VITAE
5. TTM.kannan, A.Hussain lal, M.Ganesan and R.Baskaran, Study and Over View
about Molecular Manufacturing system International Journal of Mechanical
Engineering and Robotics Research,2, 2013, pp193-210.
4. R.Ashok raj, T, parun, K.Sivaraj and TTM.Kannan, Optimization of milling
parameters of EN-8 using Taguchi Methodology, International Journal of Mechanical
Engineering and Robotics Research,2,2013. pp 202-208.
3. TTM.Kannan and P.Marimuthu, Design and development of Non Automatic
Table Top mini lathe, Lecture Notes, Springer, 2012,pp157-164.
2. TTM.Kannan, M.Ganesan, R.Baskaran &S.karthikeyan Studying Machinability
characteristics of maraging steel During Turning Using cBN and TiAlN., National
Journal of Engineering Today.7,2011,pp 35-42.
1. TTM.Kannan., M.Dharmendra and N.Parthipan Solid state refrigeration system,
National Journal of Engineering Today,2010,pp 137-140.
Publications in National / International Conference
19.TTM.Kannan and K.Thirumavalavan,Optimization of End milling
process on H-13 Die steel using ANOVA (ICNECT-2K18)
18. TTM.Kannan and R.Prabhaharan, Study of Hardness testing in Friction welding
process of ETP copper and EN 24 steel cylindrical rods (ICIETS -2018)
17.TTM.Kannan, R.Chandradass and Muhammed Shihan Optimization of milling
process parameters of Monel K-500 by ANOVA (ICRAITSE-17).
16. TTM.Kannan, R.Ramanathan and K.Chandrasekaran and S.surya Fabrication of
MEMS based Micro grinder.(ICRAITSE-17)
15.TTM.Kannan,P.Ranjith kumar,R.Ramanathan and Rajeswaran Study, overview
and implementation of MEMS based Micro factory for Sustainable manufacturing
system in 2020 (ICRAITSE-17).
14. TTM.Kannan and S,Desigan Analysis of surface roughness of PTFE plates on
drilling process by Anova,(NCIIME-2016).
13. TTM.Kannan,K.Bhuvanesh.S.Giridharan and P.Vijayakumar Optimization of
Boring parameters of AISI410 by Design of Experiment concept (TIME-2015),
CURRICULAM VITAE
12. TTM.Kannan and P.Marimuthu Development of Portable table top micro factory
for Sustainable manufacturing system, International conference on Advancements in
Engineering and technology-2015(ICAET-15)
11. TTM.Kannan and P.Marimuthu Optimization of Friction welding parameters of
AA 6082 miniature of welded joints, National conference on innovation and
Advances in mechanical engineering 2015(NCIAME-15).
10. C.Saravanan and TTM.Kannan Design and Fabrication of portable Tabletop
Friction welding machine for Miniature of components, National conference on
wireless networks Robotics and renewable Energy-2015(NCWRR-15).
9. TTM.Kannan Clean coal and carbon Capture and storage technologies, Trec step
BHEL (2013).
8. P.Marimuthu and TTM.Kannan Design and development of Non automatic table
top mini lathe” International conference on Emerging Trends in Science, Engineering
and technology,(INCOSET2012).
7. S.Palanisamy, M.Ganesan M.Chandra sekar and TTM.Kannan Design and
Development of Solar Desalinator, National conference on Innovations in Machinery
and structure,(INOMAS-2012)
6. K.Chandra sekar, S.Palanisamy, N, Bagath Singh, TTM.Kannan Evaluation of
Mechanical properties of bonded joints on sheet metal is seaming joints, National
conference on Innovations in Machinery and structure ,(INOMAS-2012).
5. P.Subramani, V. Ravi chandran, c.Vivek kumar and T.T.M.Kannan Optimization
of machining performance during turning of valve steel Using Taguchi Method,
National conference on Innovations in Machinery and structure, (INOMAS-2012).
4. TTM.Kannan and N.Parthiban Solid State refrigeration system,(RIME-2011)
3. TTM.Kannan,N.Parthipan, M.Dharmendra,&A.Annasamy Optimization of cutting
tool parameters during turning of maraging steel, International conference of design
and advances in Mechanical Engineering,(ICDAAME-2011).
2. TTM.Kannan and Partiban Studying machinability characteristics of maraging
steel during turning process using cBN and TiAlN coated tool insert,( TAME-2012)
CURRICULAM VITAE
1. TTM.Kannan and N.Parthipan Recent cutting tool materials” National conference
on Recent advances in manufacturing and Materials,(NCRAM-2011).
Workshop/FDP/Seminar attended
5. Participated one day Faculty development program on “A Guide to beginners in
Research” on 07.01.2017, organized by Indra Ganesan college of Engineering,
Trichy.
4. Participated one day workshop on“ Modern NDT methods” on 30.01.2014,
Organized by Pavendar Bharathidasan Institute of information technology, Trichy.
3. Participated one day workshop on “Product design Analysis using Hyper mesh” on
04.04.2012, organized by KLN college of Engineering, Madurai.
2. Participated one day workshop on “Recent trends in NDT testing” on 26.09.2012
organized by JJ college of Engineering, Trichy
1. Participated one day workshop on “Research methodology” on 22.10.2011
organized by JJ College of Engineering and Technology. Trichy
Declaration:
I hereby declare that all above furnished details are true and
correct to best of my knowledge and belief.
Date:
Signature
Place: Trichy Dr.T.T.M.Kannan